Subject of the issue
Describe your issue here.
Even after disabling the Power Save options in the modem, Autopi Dose not wakeup with SMS.
Your environment
2020.05.27
Steps to reproduce
Tell us how to reproduce this issue.
Expected behaviour
Autopi should become Active again
Actual behaviour
Autopi keeps itself in sleep mode.
Output of power.status command
If your issue is in any way related to the device shutting down or behaving in a unexpected way, please provide the output of the power.status command to help us diagnose the issue.
Run the command
power.status
pratik@AutopiPratik $ power.status
rpi:
uptime:
users: 1
seconds: 940
since_t: 1597094801
days: 0
since_iso: ‘2020-08-10T21:26:41.420877’
time: ‘0:15’
stn:
battery:
state: critical_level
voltage: 12.3
level: 70
last_trigger:
sleep: NONE
wake: NONE
trigger_config:
vl_wake: ’ >13.20V FOR 3 s’
vchg_wake: ’ +0.40V IN 1000 ms’
uart_sleep: ’ 900 s’
vl_sleep: ’ <12.20V FOR 240 s’
ext_sleep: ’ LOW FOR 3000 ms’
ext_wake: ’ HIGH FOR 500 ms’
spm:
last_state:
down: none
up: invalid
sleep_interval: 0
version: ‘2.0’
current_state: invalid
last_trigger:
down: invalid
up: none
Do’s & dont’s
- Do not write your unit-id anywhere.