Subject of the issue
Is it possible to wake-up the dongle with a crontab job when in hibernate mode or is the dongle s completely switch off?
If it’s not possible to wake-up it on, what would be the config to make an extended sleeping mode with fewer battery use and a possible wake-up with a cronjob?
Your environment
- What version is the dongle? (Find on software state page on my.autopi.io)
Steps to reproduce
Tell us how to reproduce this issue.
Expected behaviour
Tell us what you expect should happen
Actual behaviour
Tell us what happens instead
Output of power.status command
If your issue is in any way related to the device shutting down or behaving in a unexpected way, please provide the output of the power.status command to help us diagnose the issue.
Run the command
power.status
in the terminal on local.autopi.io, and paste the result here.
Do’s & dont’s
- Do not write your unit-id anywhere.
Hello,
The only way to wake the device up while it is in hibernation is either by switching the car on, or by sending an SMS to the SIM card in the AutoPi. You may need to set the correct power management settings.
You can follow the guide below: Remotely waking up your device
Using the power.sleep_timer
module you can alter the sleep timers on the device.
Basically there are two types of sleep timers:
- Hardware sleep timer. This is triggered at 12.2V and will force your device into sleep. This is an absolute last preventive sleep timer to ensure that your device wont drain the battery. We dont recommend tampering with this (but it is possible)
- Software/OS sleep timers. These can be altered through the
power.sleep_timer
function, and this is the ones I recommend you start working with.
You can disable all sleep timers with this command:
power.sleep_timer enable=False
You can add new sleep timer with this command:
power.sleep interval=3600 delay=7200 confirm=True
This will make the device sleep for 1 hour after 2 hours of uptime.
If you combine the sleep timers with the Jobs on the device, then you could even setup the device to do this automatically.