Auto Detect CAN Protocol failing on Aston Martin

[bolteon]

Everytime I try to run the Autodetect, I get this as a return:

"An error occurred while detecting the CAN Bus - Only one bus per protocol ID can be created."

Your environment

2020.10.05

Steps to reproduce

Run Autodetect on my car.

Expected behaviour

A selection of protocol

Actual behaviour

Sadness

Output of power.status command

rpi:

uptime:

users: 1

seconds: 1439

since_t: 1602491943

days: 0

since_iso: '2020-10-12T08:39:03.385713'

time: '0:23'

stn:

battery:

state: discharging

voltage: 12.8

level: 100

last_trigger:

sleep: NONE

wake: NONE

trigger_config:

vl_wake: '  >13.20V FOR 3 s'

ext_wake: '  HIGH FOR 2000 ms'

uart_sleep: '  900 s'

vl_sleep: '  <12.20V FOR 240 s'

vchg_wake: '  +0.50V IN 1000 ms'

uart_wake: '  0-30000 us'

spm:

last_state:

down: none

up: 'on'

sleep_interval: 0

version: 1.1.1.0

last_trigger:

down: none

up: spm

port_b: ‘00000111’

port_a: ‘10100111’

[bolteon]

I should also clarify that I don’t even see any data coming in over J1939- which sounds like an issue vs a filtered CANBUS.

Would appreciate some help here.