Upgrading to the pi3

[2600Sam]

I’m thinking about upgrading the piZero to a pi3 and using a touchscreen; are there any changes that I would have to make to the image that’s in the Zero before transferring it to the 3 or just swap and go, or start with a fresh image that has the GUI desktop on it already?
I will probably use an old IDE cable instead of the pi3 adapter because it more than doubles the cost with shipping.

[Mikael]

Hi,

When I did the move to an RPI3 it was simply just to swap the HW and boot up, I did however need to add my own odev rules in order for the USB hub on the RPI3 to find the 4G modem.

Using the RPi3 Adapter

Thank you for the how to info. What I can see from the Local Web server information, The device is online (not at the moment though) but that must then be a false positive in the web UI: [RPI3Online] But I will try to debug the connection when I get home today, I also requested the device ID change from your support but that also requires the device to be online so guessing its a catch 22 . In case i fumble something up beyond repair, are there any instructions on how to restor…

Br,
Mikael