[SOLVED] Update cause error

#1

Logged in global autopi webpage. Connected to Device.
Click on software update and proceed to update. After update completes, I get the following error:

Failed to flash firmware: avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.00s avrdude: Device signature = 0x000000 (retrying) Reading | ################################################## | 100% 0.00s avrdude: Device signature = 0x000000 (retrying) Reading | ################################################## | 100% 0.00s avrdude: Device signature = 0x000000 avrdude: Yikes! Invalid device signature. Double check connections and try again, or use -F to override this check. avrdude done. Thank you.

Not sure what the impact is.

#2

Hi @Ameel_Beesony,

This is an indication that one of the chips on the device could not be flashed.

But the software wont be flashed until the device accepts the signature, so you can just try it again.

best
Peter