APN settings was done manually. However, Autopi Dongle can not connect to the Internet.
Your environment
4G/LTE Edition
Steps to reproduce
After inserting the SIM card and turning on the power
Expected behaviour
Guess that the APN setting is not completed
Actual behaviour
When confirming the setting with QMI.system_info, I confirmed that MCC, MNC number setting was not done.
Please tell me how to change MCC, MNC number settings.
Hi malte
I confirmed “trableshooting”. The following is the result.
AutoPi.io Cloud Terminal - Use with caution. Type ‘help’ for help. local user @ Local device $ cmd.run “lsusb”
|-
Bus 001 Device 003: ID 2c7c:0125
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub local user @ Local device $ cmd.run “qmi-manager status”
‘[ERROR] QMI network not connected’ local user @ Local device $ cmd.run “qmi-manager down”
Timeout has occurred
To increase timeout (in seconds): _timeout=60 local user @ Local device $ cmd.run “qmi-manager up”
Timeout has occurred
To increase timeout (in seconds): _timeout=60
The following is results of qmi.system_info
The value of MNC is not the value 20, but the value 10 is the correct.
The MCC and MNC values are embedded on the SIM card, and can and should not be changed by the user.
You do have to input the correct APN for the SIM card to connect to the LTE network, so can you confirm that you have set the APN correctly based on the provider you are using?
From the MNC and MCC values, the presets has the following APN value specified: “plus.acs.jp”
Have you tried that?
Can you try to run the commands again?
And if they keep timing out, can you try to increase the timeout, like so?
Hi malte
I confirmed “trableshooting”. The following is the result.
local user@Local device $ cmd.run ‘qmi-manager down’ _timeout=120
|-
Loading profile at /etc/qmi-network.conf…
APN: plus.4g
APN user: plus
APN password: 4g
IP type: 4
qmi-proxy: no
Network already stopped
Clearing state at /tmp/qmi-network-state-cdc-wdm0…
Connection down
local user@Local device $ cmd.run ‘qmi-manager up’ _timeout=120
error: couldn’t create client for the ‘uim’ service: CID allocation failed in
the CTL client: Transaction timed out
[WARN] Command failed with exit code 1: qmicli --device-open-qmi --device
/dev/cdc-wdm0 --uim-get-card-status | grep -q “Card state: ‘present’”
[WARN] Command failed with exit code 1: qmicli --device-open-qmi --device
/dev/cdc-wdm0 --uim-get-card-status | grep -q “Card state: ‘present’”
[WARN] Command failed with exit code 1: qmicli --device-open-qmi --device
/dev/cdc-wdm0 --uim-get-card-status | grep -q “Card state: ‘present’”
[WARN] Command failed with exit code 1: qmicli --device-open-qmi --device
/dev/cdc-wdm0 --uim-get-card-status | grep -q “Card state: ‘present’”
[ERROR] No SIM card present
Send pictures of the orientation of the SIM card below.
Also I will send the value of APN
Even if I insert a different SIM card for testing, the values of MMC and MNC will not change. It is always fixed with MMC 440, MNC 20.