360ns
November 5, 2019, 7:45pm
#1
When I run the cmd.run “qmi-manager status” command I get ‘[ERROR] QMI network not connected’
Version: 219.10.10
It is an ATT sim card and I did verify that it was working on another device.
Malte
November 6, 2019, 1:23pm
#2
Hi Josh
Have you tried following this guide?
4G internet setup troubleshooting
You are experiencing issues connecting to the internet, when connected to the WiFi hotspot on the AutoPi Dongle.
Prerequisites:
Before following this guide, you must have completed the initial setup guide found here:
Check SIM card
Your SIM card must be setup for data. To check this, insert the SIM into another device, like a smartphone or similar. When inserted in the other device you must be able to browse the web.
If you ordered a branded version of …
Best regards
360ns
November 7, 2019, 12:41am
#3
Yes I’m at step 2 and the QMI status gives me the error I stated above.
360ns
November 7, 2019, 1:45pm
#4
I confirmed that the sim card is oriented and seated correctly as well. I am able to reach the internet with the sim card in another device. I have tried the present APN settings but none of them worked. I have also tried “broadband” string that I found on another topic here.
Thanks