Ioniq EV - Speed sensor?

Hi There!
I’m having trouble access my vehicle speed sensor. - I don’t get any readings.
I would like to compares speed vs power usage.

Hi Troels

Have you checked out the car library on my.autopi.io?

Best regards
/Malte

Hi Malte!

I’v tried those 2… But none of them gives feedback in the Dashbord.

Hi Troels

Have you tried running them manually when the car is in drive?
When viewing the PID in the library, there is a button that will execute the PID directly on the car.

/Malte

Actually not… - Haven’t thought of that. - But if the “loggers” works, then the data should be recorded right? - And therefor be shown right? - I’l give it try this afternoon.

Yes, you are right, the loggers should be able to log the data.

If you try to run then manually, and then receive some data, then it might be an issue with the data upload or maybe something on my.autopi.io which i will be able to investigate.

You could try getting the logs from the device, see this guide


or

/Malte

Hi Malte!

I’v added these loggers yesterday and synced them before my journey home.
In the Dashboard I can’t select the loggers, which maybe a restriction to the numbers of widgets in dashboard, or simply because of lack of recorded data.

I’d run the SPEED directly, and got some data. But not usable in dashboard.

Hi Malte!

Sorry, but know results in the terminal.

Therefor, I still need to get information about the speed of the vehicle.