Manfred,
Thanks - do you find it pretty stable ? Does the vehicle reliably stay on during charging ?
yes and yes.
my_powerevent runs for 3 months now, no problems. I never change it, so it stays stable.
Sometimes the dongle goes to power off while driving, because my Hyundai stops talking -> better power off than staying onâŚ
@Manfred absolutely agree Hyundai stops talking -> better power off than staying onâŚ
When, this happens does it reset by itself or do you need to unplug plug . I have seen this once and looking for a solution to reboot the dongle
Thanks
After sleep of Autopi, it works again. No need to unplug.
great thanks. âŚ
Thanks @Manfred for your github package 
But I have a problem, I think that none of my cron are running, (exact configuration of your picture) and I added a cron for telegram alert for charging Receive charging alerts on your phone ( and smart watch ) but no telegram message (but i correctly tested my token and ID with a text command from a web brother) !
Is there a special action to activate cron system on autopi ? Because none of the event you created appears in the event log 
Thanks
Hi,
There is nothing special on cron jobs.
does anything work on my.autopi.io (Dashboard, Loggers) ?
Try reboot the dongle.
The rpi temp is working but none of my jobs. I will try to physically disconect the autopi to check if it is better 
But itâs a pain because I fixed it on the insolator of the under dash. Then I have to remove it
@Manfred, I see that your cron_autostart is : âon the first day of every months at 01h00â but does it mean that I have to wait march 1st 01h00 for my job to start ? 
It could explain why it is not actually working ? 
My rpi temperature is working but with " * * * * * " which means âevery minutes all the timeâ.
You don´t need the autostart cronjob. The funtion my_autostart.autostart is only needed ONE time for creating the shelve variables. Call it manually is also OK. The monthly thing I checked only, because there is no cron-only-on-startup-option.
Maybe you need a reboot to activate your new cron jobs -> ask the autopi guysâŚ
I found the problem ==> When I opened your .py files with notepad and copy/paste on the custom code, a problem appears because in all your file there is at each line a 4 blank character indent and it creates an error. I suppressed manually on each line on autostart.py and now one script is working (I have a postpone 30 min which appears every minutes)
Could you upload script without this indent ? because I suppressed it on the 3 files but I still have no event in the events log then may be I didnât correctly modify the indentâŚ
$ my_autostart.test
âmy_autostartâ virtual returned False: unexpected indent (my_autostart.py,line 2)$ my_autostart.test
Hello everyone.
For this code to work it is necessary to create the file ManfredsPowerEvent.slv right?
Where and how can I create it?
Any help?
Thanks everyone.
Hi Joaquim,
it is done by the autostart cronjob. The funtion my_autostart.autostart is only needed ONE time for creating the shelve variables. Call it manually is also OK.
Ok. But cronjob is every run on start? It initialize every time that autopi recovery off sleep?
That´s fine, read the code commentsâŚ
Ok. Thanks.
Can you explain the webpage? How can i view the data? Cant understand.
Thanks
I think you mean this:
Hello.
Good morning.
Just found one problem in code âmy_eventgen.pyâ.
Every line of the code have a extra TAB in the begiun of the line. Just try to correct by may be do some thing wrong. This code dont work for me. Every time give me timeout.
The âmy_powerventâ is working.
Can you may be give me a help?
Thanks.
Hi,
as you are the 2nd guy with problems, I updated the python files on my github (no leading tabs).
try the sub-programs instead of main âpollâ program like this:
my_eventgen.get_bms $timeout=60
good luck
Manfred
Hello.
After cheking every sub program indidualy with seams that is working. I will try and give feedback.
Thanks.